Products
Products Tags
{label:contact us}
CONTACT US
Home > Products > Transmitter and receiver

 

FUTV3627 Indoor (100W) MMDS 2.5G 2.7G Broadband TV Broadcast dvb-s dvb-t2 Transmitter amplifier

R: V20160123-15-16 Data sheet  

Price(USD) Qty(PCS) Shipping(USD) Total(USD) Shipping Method Payment
0 inquire
11500USD

 

 

Input:N type Output:N type


Product Overview

FMUSER FUTV3627 Digital MMDS (Multichannel Microwave Distribution System) Transmitter can support single-channel or multi-channel broadband transmission.
Single-channel transmission often requires a microwave power combiner to compound single-channel microwaves and send it to the antenna through waveguide. In this way, it can enhance the microwave power and reach a long distance.
However, Multichannel-channel broadband transmission requires no power combiner but connect the IF source to transmitter through a mixer. After frequency conversion, filtering and amplification process, it sends the signal to the antenna through waveguide. In this way, microwave power is low and the transmission distance is short.
This MMDS transmitter can provide a signal channel with maximum 200MHz broadband. It has a low local oscillator phase noise to make it possible to be applied both in analog and digital transmission. Advanced super linear amplification technology is adopted to boost the transmitting power and reduce the non-linear distortion and overall consumption at the same time.
Also, AGC function can sustain a constant power output, and the circulator can provide VSWR protection. All these features make FUTV3627 widely used in broadcasting system.


Key features
·low local oscillator phase noise, available for both analog and digital transmission
·Low power consumption and super linear design to improve the transmission power, and reduce the nonlinear distortion
·Support AGC function with sustained power output to allow the transmitter a good stability and reliability
·Full digital front panel control, easy operation.
·LCD window displaying output power, digital attenuator status, AGC/MGC working status and voltage.
·Easy to install, elegant appearance



Appearance and Illustration



Principle Chart


Technical Specifications

Basic Parameters

Working frequency band

2500MHz~2700MHz

In-band Flatness

±0.75

In-band Intermodulation

≤-70dBc

Clutter suppression

≤-65dBc

harmonic suppression

≤-70dBc

Local oscillator phase noise

≤-90at10KHz dBc/Hz

Local oscillator carrier deviation

±500Hz

IF Range

467MHz~667MHz

Input Level

≥-15dBm

Input

Interface

N type

Impedance

50 Ohm

Output power

100W

MW Output impedance

50 Ohm

Output

Output interface

N type

Working temperature

-20~+45C

Relatively humidity

95%, 25C no condensation

Environment condition

Cooling mode

inside cooling fan

power supply

AC, 220V±10%/50Hz

Machine room requirement

less dust, no shake

Price(USD) Qty(PCS) Shipping(USD) Total(USD) Shipping Method Payment
0 inquire
11500USD

 

Leave a message 
  • *Name
  • *Email
  • Phone
  • Address
  • *Code
  • Message
Message List
Comments Loading...

|About US|News|Products|Payment|Support|Contact US|Download|

Copyright of FMUSER INTERNATIONAL GROUP INC

  Contact Us