FMUSER FSN-1000T RDS 1000W 1KW Proffessional FM Transmitter Radio Broadcast Long Range with FU-DV1 Antenna kit For Radio Stations
This 1kw FM transmitter is designed in a compact 19 inch 2U chassis by integrating all modules inside, small in size and easy in operation and maintenance. It adopts the most advanced RF transistor of BLF188XR OR MRFE6VP61K25H, which ensures a high working efficiency of 72%, the power loss is reduced to the minimum value ever.
The DSP(Digital Sound Processing) technology makes the FSN-1000T 1000w FM transmitter an enjoyable sound broadcasting device for all music lovers, you’ll no longer be bothered by the noises or distortions.
As quality assurance, FMUSER Provides 1 YEAR warranty for this professional broadcast transmitter, you’ll have no worries to use it for the radio station.
FREQUENTLY APPLICABLE USES:
1). Community Radio stations
2). LPFM radio stations
3). City radio stations
4). Christian Church radio stations
1) OVERHEAT PROTECTION:
The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range.
SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile.
When the fan stopped running, there will be alarming message showing on the screen like the following:
The 1kw FM transmitter auto scans the best matching frequency on antenna to maximize the broadcasting efficiency at minimum SWR ratio, this ensures the best performance from both the transmitter and antenna.
5) MODULATION ADJUSTABLE:
When audio mixers are connected with the 350W FM transmitter through the XLR Balanced audio input interface, the transmitter will provide plenty of options for the modulation to best match with the mixer.
6) ONE TOUCH OPERATION:
This FSN-350T 350W FM transmitter is designed with a precisely sensitive touch screen in replace of the control buttons on previous transmitters. With all information displayed clearly on the screen, users can control and configure all parameters very easily.
7) FLEXIBLE AUDIO OPTIONS
The pre-emphasis of 350W FM transmitter are flexible to choose among 0US / 50US/ 75US, users can choose the best match mode according to their own needs.
8) ADJUSTABLE POWER OUTPUT
The RF out of this 350W FM transmitter is continuously adjustable from 0-350 watt at the stepping of 0.1watt, which means you can tune it to 1w, 1.1w, 1.2w...50w...100w...150w...350w, with just one transmitter you’ll get multiple modes of outputs and easy to tune as per your needs.
9) LONG COVERING RADIUS
Strong air cooling system embeded on both front and rear side of transmitter for safer and more stable performance
Frequency step value: 10KHz
Modulation: FM, peak deviation ± 75KHz
Frequency stability: <± 100Hz
Frequency stabilization method: PLL frequency synthesizer
RF output power: 0~1000 watts ± 0.5dB
Residual wave: <- 70dB
Higher harmonics: <- 65dB
Parasitic AM: <- 50dB
RF output impedance: 50Ω
RF output connector: L29 female
Audio input connector: XLR female
AUX input connector: BNC female
Pre-emphasis: 0us, 50us, 75us (user setting)
S / N ratio mono:> 70 dB (20 to 20KHz)
S / N ratio stereo:> 65 dB (20 to 15KHz)
Stereo resolution: -50dB
Audio frequency response: 30 ~ 15000Hz
Audio distortion: <0.3%
Audio level gain: -12dB ~ 12dB step 3dB
Audio input: -19dB ~ 5dB
Power supply voltage range: 110V ~ 260V
Operating temperature range: -10 to 45 ℃
Work mode: continuous work
Cooling method: air cooling
Cooling efficiency: <95%
Work Altitude: <4500M
Power consumption: 1500VA
Dimensions: 483 x 320 x 88 mm without handles and protrusions, 19 "2U standard rack.
FMUSER's latest version, more sustainable and stable in quality
High stereo resolution, enjoy original and purified music
Super clean and clear sound with very low distortion, perfect exciter for amplifiers
Perfectly match with FMUSER RDS Encoder
FU-DV1 High Gain FM Dipole Antenna
This FU-DV1 FM dipole antenna is specially designed for FM radio broadcasting system, to receive FM radio transmitter output power signal and send the signal out efficiently. It can use multiple antenna elements to compose antenna array to enhance the gain. It is very easy to assemble for use.
* side-mount low-loss
* Broadband Antennas
* stainless steel
30 meters of high quality 1/2'' Coaxical Cable
1* FSN-1000T 1KW Touch Screen FM transmitter
1* FU-DV1 FM Dipole Antenna
1* 30 meter 1/2'' Cable