FMUSER hereby presents newly innovated FSN-600T 600W FM transmitter with touch screen to all FM broadcast fans with due respect. Exclusively from other 600W transmitter in the market, this FM transmitter features by its human-friendly touch screen operation interface, highly stable and reliable performance and near CD quality stereo sound effect, which make it a remarkable improvement in the whole market, and leads to its high popularity in using for the most of FM radio stations.
This FM broadcast transmitter is designed in a compact 19 inch 2U chassis by integrating all modules inside, small in size and easy in operation and maintenance.
The DSP(Digital Sound Processing) technology makes the FM transmitter an enjoyable sound broadcasting device for all music lovers, you’ll no longer be bothered by the noises or distortions.
As quality assurance, FMUSER Provides 5 YEAR warranty for this FMUSER Professional FM transmitter. , you’ll have no worries to use it for the radio station.
Frequency step value: 10KHz
Modulation: FM, peak deviation ± 75KHz
Frequency stability: <± 100Hz
Frequency stabilization method: PLL frequency synthesizer
RF output power: 0~600 watts ± 0.5dB
Residual wave: <- 70dB
Higher harmonics: <- 65dB
Parasitic AM: <- 50dB
RF output impedance: 50Ω
RF output connector: N female
Audio input connector: XLR female
AUX input connector: BNC female
Pre-emphasis: 0us, 50us, 75us (user setting)
S / N ratio mono:> 70 dB (20 to 20KHz)
S / N ratio stereo:> 65 dB (20 to 15KHz)
Stereo resolution: -50dB
Audio frequency response: 30 ~ 15000Hz
Audio distortion: <0.3%
Audio level gain: -12dB ~ 12dB step 3dB
Audio input: -19dB ~ 5dB
Power supply voltage range: 110V ~ 260V
Operating temperature range: -10 to 45 ℃
Work mode: continuous work
Cooling method: air cooling
Cooling efficiency: <95%
Work Altitude: <4500M
Power consumption: 1500VA
Dimensions: 483 x 320 x 88 mm without handles and protrusions, 19 "2U standard rack.
1 X 600W FM Transmitter with touch screen
1 X DV1 Dipole Antenna
1 X Coax Cable
1 X Audio Cable
This kit include a very good Antenna:
This FU-DV1 FM dipole antenna is specially designed for FM radio broadcasting system, to receive FM radio transmitter output power signal and send the signal out efficiently. It can use multiple antenna elements to compose antenna array to enhance the gain. It is very easy to assemble for use.
* side-mount low-loss
* Broadband Antennas
* vertical polarization
* stainless steel
* DC Grounding
Frequency Range:87-108 MHz(we can make either full band/fixed frequency)
Input Impedance: 50 ohm
VSWR:<1.3 (full band),<1.10(fixed frequency)
The antenna array unit is particularly suitable for forming a variety of radiation pattern
Maximum Power Input-watts:1KW/3KW/5KW/10KW
Lighting Protection: Direct Grounding
Connector: L27-50K(1KW), IF45-50K(3KW), IF70-50K(5KW), IF110-50K(10KW)
Rated Wind Velocity: 200 km/h
Radiating Element Material:Aluminum Alloy
Holding Pole Diameter: 50-100 m
This kit also include 30 meters Cable:
FREQUENTLY APPLICABLE USES:
1). Community Radio stations
2). LPFM radio stations
3). City radio stations
4). Christian Church radio stations
1) OVERHEAT PROTECTION:
The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range.
2) OVER SWR PROTECTION:
SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile.
3) FAN ERROR ALARM
When the fan stopped running, there will be alarming message showing on the screen like the following:
4) MODULATION ADJUSTABLE:
When audio mixers are connected with the FM transmitter through the XLR Balanced audio input interface, the transmitter will provide plenty of options for the modulation to best match with the mixer.
5) ONE TOUCH OPERATION:
This FM transmitter is designed with a precisely sensitive touch screen in replace of the control buttons on previous transmitters. With all information displayed clearly on the screen, users can control and configure all parameters very easily.
6) FLEXIBLE AUDIO OPTIONS
The pre-emphasis of FM transmitter are flexible to choose among 0US / 50US/ 75US, users can choose the best match mode according to their own needs.
All the products will build a Radio Station Like this: To broadcast your music and advertising in a town or a city.