Products Tags
CONTACT US

FMUSER INTERNATIONAL GROUP INC

Address: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620

Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305

---------------------------------------------

Phone/Whatsapp/Wechat: +86 15800205544
Skype: Erin-huang2
Email: hch@cantonmade.com



Home > News

What is Flange connector?

Published:2020/6/12 17:07:38 Visits:
(1) The specifications of the flange connector (decided the model of the flange joint, there are two ways to distinguish):



1. According to the flangeconnector:
The flange connector is not only the size of the wiring end, but also the size of the other end. The common ones

are mainly IF45, IF70, IF110, IF140, and the common ones are IF45 and IF70. These figures will mark the data such

as the size and inner and outer diameter of the joint:


2. The second method to identify the flange connector is: according to the end of the flange  connected to the

feeder, we have to explain to the supplier which type of line is to be connected, there are RG8 RG393 RG213 RG214

7D LMR400, and we Commonly used 1/2, 7/8, 5/8. As shown in figure: Figure 1 is connected to 1/2 feed tube, Figure 2

is connected to 7/8.


(2) Connection method of flange  connector

The male and female of the flange connector are the same. It is mainly connected by the middle pin, and then the

three holes of the joint are fixed with screws. Different joints also need different screws.
IF45 uses M6 screws.

Here are some installation details to note:





|About US|News|Products|Payment|Support|Contact US|Download|

Copyright of FMUSER INTERNATIONAL GROUP INC

在线客服

技术支持
点击这里给我发消息
产品咨询
点击这里给我发消息
销售一号
点击这里给我发消息
销售2号
点击这里给我发消息