FMUSER INTERNATIONAL GROUP INC
Address: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620
Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305

Phone/Whatsapp/Wechat: +86 15800205544
Skype: Erinhuang2
Email: hch@cantonmade.com
Phaselocked loop PLL For FM Radio
1. Basic composition of phaselocked loop
Many electronic devices need to work normally, usually requiring an external input signal to be synchronized with the internal oscillating signal. This can be achieved by using a phaselocked loop.
The phaselocked loop is a feedback control circuit, referred to as a phaselocked loop (PLL). The phaselocked loop is characterized by the use of an externally input reference signal to control the frequency and phase of the internal oscillating signal of the loop.
Because the phaselocked loop can achieve automatic tracking of the input signal frequency to the input signal frequency, the phaselocked loop is usually used for the closedloop tracking circuit. During the operation of the phaselocked loop, when the frequency of the output signal is equal to the frequency of the input signal, the output voltage maintains a fixed phase difference with the input voltage, that is, the phase of the output voltage and the input voltage is locked, which is the phase lock. The origin of the ring name.
The phaselocked loop is usually composed of a phase detector (PD, Phase Detector), a loop filter (LF, Loop Filter) and a voltage controlled oscillator (VCO, Voltage Controlled Oscillator). The principle block diagram of the phaselocked loop is shown in the figure. 841 is shown.
The phase detector in the phaselocked loop is also called a phase comparator. Its function is to detect the phase difference between the input signal and the output signal, and convert the detected phase difference signal into a uD(t) voltage signal output. After the lowpass filter is filtered, the control voltage uC(t) of the voltagecontrolled oscillator is formed, and the frequency of the oscillator output signal is controlled.
2. How the phaselocked loop works
The phase detector in the phaselocked loop is usually composed of an analog multiplier, and the phase detector circuit composed of the analog multiplier is shown in Figure 842.
The working principle of the phase detector is: set the signal voltage input by the outside world and the signal voltage output by the voltage controlled oscillator are:
（841）
（842）
The ω0 in the equation is the oscillation angular frequency of the voltage controlled oscillator when the input control voltage is zero or DC voltage, and is called the natural oscillation angular frequency of the circuit. Then the output voltage uD of the analog multiplier is:
The sum frequency component in the above equation is filtered out by the low pass filter LF, and the remaining difference frequency component is used as the input control voltage uC(t) of the voltage controlled oscillator. That is, uC(t) is:
（843）
The ωi in the equation is the instantaneous oscillation angular frequency of the input signal, and θi(t) and θO(t) are the instantaneous phases of the input signal and the output signal, respectively. According to the phasor relationship, the relationship between the instantaneous frequency and the instantaneous phase is:
（844）
Then, the instantaneous phase difference θd is （845）
To differentiate between the two sides, the relationship between the frequency differences is
（846）
The above equation is equal to zero, indicating that the phaselocked loop enters the phase locked state. At this time, the frequency and phase of the output and input signals remain constant, and uc(t) is a constant value. When the above formula is not equal to zero, it indicates that the phase of the phase locked loop is not locked, the frequency of the input signal and the output signal are not equal, and uc(t) changes with time.
Since the voltage control characteristic of the voltage controlled oscillator is as shown in Fig. 843, this characteristic indicates that the oscillation frequency ωu of the voltage controlled oscillator is centered on ω0 and varies with the change of the input signal voltage uc(t). The expression for this attribute is
（846）
The above equation shows that when uc(t) changes with time, the oscillation frequency ωu of the voltagecontrolled oscillator also changes with time. The phaselocked loop enters the “frequency pull”, and the frequency of the input signal is automatically tracked to make the phaselocked loop enter. Locked state and keep the state of ω0=ωi unchanged.
2. Application of phaselocked loop
[1] Application of phaselocked loop in modulation and demodulation
(1) The concept of modulation and demodulation
In order to realize longdistance transmission of information, the signal is modulated by the modulation method at the transmitting end, and the receiving end must perform demodulation after receiving the signal to restore the original signal.
The socalled modulation is to control the parameters of the carrier signal uC by using the input signal ui carrying information, so that a certain parameter of the carrier signal changes with the change of the input signal. The parameters of the carrier signal have amplitude, frequency and phase. Therefore, the modulation has three kinds of amplitude modulation (AM), frequency modulation (FM) and phase modulation (PM).
The characteristic of the amplitudemodulated wave is that the frequency is equal to the frequency of the carrier signal, and the amplitude varies with the amplitude of the input signal; the characteristic of the frequencymodulated wave is that the amplitude is equal to the amplitude of the carrier signal, and the frequency varies with the amplitude of the input signal; the phasemodulated wave The characteristic is that the amplitude is equal to the amplitude of the carrier signal, and the phase varies with the amplitude of the input signal. The schematic diagram of the amplitude modulation wave and the frequency modulation wave is shown in Fig.
844.



Demodulation is the inverse of modulation, which reduces the modulated wave uO to the original signal ui.(a) in the above figure is an input signal, also called a modulation signal; (b) is a carrier signal, and (c) is an amplitude modulation wave and a frequency modulation wave signal.
[2] Application of phaselocked loop in frequency modulation and demodulation circuits
The characteristic of a frequency modulated wave is that the frequency varies with the amplitude of the modulated signal. As can be seen from the 846 equation, the oscillation frequency of the voltage controlled oscillator depends on the amplitude of the input voltage. When the frequency of the carrier signal is equal to the natural oscillation frequency ω0 of the phase locked loop, the frequency of the output signal of the voltage controlled oscillator will remain unchanged at ω0. If the input signal of the voltage controlled oscillator has a signal uc outputted by the phaselocked loop lowpass filter, and the modulation signal ui, the frequency of the output signal of the voltagecontrolled oscillator is centered on ω0, which varies with the amplitude of the modulated signal. And the changing FM signal. Therefore, the FM circuit can be composed of a phaselocked loop, and the block diagram of the FM circuit composed of the phaselocked loop is shown in Figure 845.
According to the working principle of the phaselocked loop and the characteristics of the FM wave, the block diagram of the demodulation circuit can be obtained as shown in Figure 846.
If the FM signal is input, make the loop passband wide enough that the signal modulation spectrum falls within the bandwidth. At this time, the frequency of the voltage controlled oscillator tracks the change of the input modulation, as shown in Figure 6.1. For a detailed analysis of phaselocked loops, see the book on phaselocked techniques. Only the principle of phaselocked loop frequency discrimination is explained here. It can be simply assumed that the tracking error between the voltage controlled oscillator frequency and the input signal frequency is negligible. Therefore, at any instant, the frequency ωv(t) of the voltage controlled oscillator is equal to the instantaneous frequency ωFM(t) of the FM wave.