Products Tags
CONTACT US

FMUSER INTERNATIONAL GROUP INC

Address: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620

Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305

---------------------------------------------

Phone/Whatsapp/Wechat: +86 15800205544
Skype: Erin-huang2
Email: hch@cantonmade.com



Home > News > FM Broacast

How to Design Output-Matching Networks for Transmitter?

Published:2020/9/25 11:22:50 Visits:


The MAX1472 is a crystal-referenced phase-locked loop transmitter designed to transmit OOK/ASK data in the 300MHz to 450MHz frequency range. It supports data rates up to 100kbps. When matched to a 50Ω system, the MAX1472 PA is capable of delivering more than +10dBm of output power while maintaining an effecTIve efficiency greater than 43%. The crystal-based architecture of the MAX1472 eliminates many of the common problems with saw transmitters by providing greater modulaTIon depth, faster frequency settling, higher tolerance of the transmit frequency, and reduced temperature dependence.


The power amplifier (PA) of the MAX1472 is a high-efficiency open-drain class-C amplifier. With a proper output matching network, the PA can drive a wide range of impedances, including the small loop PC board trace antenna and any 50Ω antenna. Figure 1 shows a recommended matching network for a 50Ω system. The matching network transforms the 50Ω load to a higher impedance at the output of the PA in addiTIon to forming a bandpass filter that provides attenuaTIon for the higher order harmonics.

tupian1

Figure 1. MAX1472 application circuit.

Table 1 shows the recommended output matching network component values for four widely used operating frequencies. These values were used with the MAX1472 evaluation kit (EV-kit). Some fine tunings may be required due to parasitic inductance and capacitance on PCB.


Table 1. Output Matching Network Component Values
 

Figures 2, 3, and 4 illustrate the output power and effective efficiency of the MAX1472 when configured with the above matching networks.

Figure 2. Efficiency vs. supply voltage with CW tone.

Figure 3. Efficiency vs. supply voltage with 50% OOK signal.

Figure 4. Output power vs. supply voltage.


You may interested in this product:

http://www.tvfmuser.com/html/product/300Watts%20studio-transmitter-for-sale.html

How to Order:
Please contact us, we will give you a discount for shipping.
Email: hch@cantonmade.com
Mob/Whatsapp/Wechat: +86 15800205544
Skype:erin-huang2


|About US|News|Products|Payment|Support|Contact US|Download|

Copyright of FMUSER INTERNATIONAL GROUP INC

在线客服

技术支持
点击这里给我发消息
产品咨询
点击这里给我发消息
销售一号
点击这里给我发消息
销售2号
点击这里给我发消息